中文 (中国)
Copyright © 2024 IEAST (International) Limited. All rights reserved. According to copyright law, no part of this publication may be translated into any language, in any form or by any means, without the written permission of IEAST (International) Limited. This includes, but is not limited to, mechanical, optical, electronic, recording or other methods of copying, transmitting, or storing in a retrieval system.
WARRANTY #
SAFETY CONSIDERATIONS #
Introduction #
IEAST AMP80 is a WiFi and Bluetooth Class D amplifier with built-in ESS9023. Designed to provide a high quality audio streaming solution that is easy to install and configure, its advanced integration features allow it to amplify the audio signal from a TV screen to broadcast to local speakers. Wireless connection modes (Wi-Fi and Bluetooth) provide instant access to millions of high-definition music titles. But it will also allow you to amplify analogue sources, which simply connect in wired mode. With built-in Spotify Connect, AMP80 lets you stream directly from the cloud. Start a stream from your mobile device and AMP80 will play stream content uninterrupted even if you switch your phone off. When you add another AudioCast products to your network, you can establish a connection between the different devices in Wi-Fi. You can play your music in all the rooms simultaneously or a different music in each room, as you wish.
Specifications #
| Type | Wireless Multi-Room Stereo Amplifier | |
|---|---|---|
| Inputs | WiFi, Bluetooth V5.0,AUX in,optical in in,USB 2.0 | |
| Outputs | Number of output channels | 2 |
| Power (W / channel) | 4 ohms | 1 kHz | ＞80 W @ 1% THD+N | |
| Power (W / channel) | 8 ohms | 1 kHz | ＞60 W @ 1% THD+N | |
| Input Sensitivity | ~700 mV – full power | |
| Maximum input voltage (RMS) | 1V | |
| Signal to noise ratio (SNR) at THD+N < 1%, f = 1 kHz, Gain = 26 dB | 90 dB | |
| Total Harmonic Distortion THD + N@1 KHz | < 0.1% | |
| Wireless network compatibility | IEEE802.11 b/g/n 2.4GHz | |
| Supported audio formats | APE、FLAC、MP3、WAV、AAC、AAC+、WMA、ALAC、AIFF | |
| Streaming Protocol | DLNA,Airplay,Spotify connect,Qplay | |
| Audio Decoding | Up to 24bit/192KHz | |
| Resolution | 44.1kHz/24bit | |
| Ethernet | 10/100M | |
| Smart home control | TCP/IP,Infrared IR | |
| Bluetooth | Bluetooth 5.0 Bluetooth Audio codec:SBC | |
| Supply voltage | DC:32V/4.75A AC:100-240V ~50/60Hz 2.5A | |
| Host weight | 0.5kg | |
| Amplifier size(H x D x W) | 136×134.8x45mm（Built-in antenna） | |
| Power supply size (H x D x W) | 160x65x33mm | |
| SKU | AMP80v2 | |
| EAN | 6970504260139 |
Inside the box #
|
User manual x 1 |
Banana Connector x4 |
|---|---|
|
RCA Breakout Cable x 1 |
Remote Controller x 1 |
|
32V/4.75A power adapter x 1 |
AC power cord x 1 |
Note: After opening the package, please check the packing list as soon as possible. If you find that the accessories are missing, please contact the sales outlet as soon as possible.
In order to ensure the continuous progress and development of the product, IEAST hereby declares that the company reserves the right to modify or improve the product specifications at any time without prior notice to the user.
Service email: support@ieast.net
Service hotline: +86 400-100-5988
